Black Powder Coating Horse Stables Steel Stainless For Horses
Stall doors can be either swinging or sliding. In either case, there should be latches that undo easily, but that horses cannot tamper with. Many stall Houdinis have escaped and let out a few friends for an overnight stable ransacking. That ends up a clean-up headache for the owner, as well as a possible safety and health hazard for the horses.
Swinging doors should open out into the alley, and be kept shut at all other times. They should fasten securely shut so horses don't escape. Sliding doors should slide smoothly. Grain room doors should be locked. Doors should be at least 4 ft (1.2m) wide.
The stall is the basic functional unit of a horse stable or T shelter. A simple backyard pleasure horse stall may at first appear different than a stall in a full-feature boarding operation, but they both provide a suitable environment for the horse and handler. Safety for handlers and horses should be a primary consideration in stall design. Comfort for the horse is very important, as is convenience for the handler in performing chores associated with good horse care. No matter what your management style or needs, the basics of a safe horse stall are the same. Many options that effect function and cost are available for horse stall features. This fact sheet provides an overview of some basic stall features for a typical 1,000-pound horse. You should adjust the dimensions for significantly larger stall occupants.
Products name | Black Powder Coating Horse Stables Steel Stainless For Horses |
Panel size | 2.75m x 2.1m (Customized size are accepted) |
Structure | Top part with hollow bars, lower parts with infillings |
Frame material |
Steel pipe (32*25*2mm RHS, 50*25*3.5mm RHS, φ19*1.5mm round pipe) |
Surface finish | Hot Dip Galvanized or Black powder coated |
Infilling Material |
fabric, PP plate, fumigation wooden plate, bamboo plate |
Color | Customized color |
Door | One swivel door in front Or sliding door |
Door Mode | Hinge |
Lock | One spring lock |
Packing | Steel pallet |
Horse barns are commonly built with a ceiling height of 10 to 12 feet with 8 feet being the minimum. A low ceiling not only inhibits air circulation, but also increases the chance that a horse may strike its head. In fact, many stables have open truss or rafter construction with no ceiling. In this case, the minimum height is the clearance to the lowest item on which a horse may strike its head, such as a light fixture or truss bottom chord.
Contact Us at Any Time