There is much disagreement over the proper hay feeding station. A hay rack or net is disliked by some owners due to the inhalation and irritation of hay dust and its unnatural position for a horse to eat. An alternative to a rack or net is a hay manger. Mangers let the horse eat in a more natural position, are less prone to trap the horse, and reduce dust fall. A well-designed manger is usually made of wood, starts flush with the floor, and ends above horse chest height. Hay chaff and dust can accumulate in the bottom of the manger and must be removed regularly.
A ring for tying the horse is often placed at or above horse wither height. Place the ring away from the feed and water buckets and toward the back on one of the sidewalls. This keeps the horse secure when cleaning the stall or grooming and tacking. Be sure the wall is strong enough to withstand resistance from a horse, and fasteners are smooth on both sides of the wall.
Many stall floor options are available and should meet most of the following requirements. Horses are hard on flooring so it must be durable against pawing and use by a 1,000-pound occupant. A good floor has some “give.” A floor that absorbs some of the impact and weight of a horse will reduce stress on the horse’s legs and ease foot problems. The floor should be nonslip to prevent injuries, especially muscle pulls when the horse tries to stand from a lying position. Slippery floors can inhibit the horse from even trying to lie down. Since horses have their heads close to the ground for most of the day, a non-odor (ammonia) retentive, nonabsorbent floor is beneficial. Minimize the time needed to clean and maintain the stall floor by choosing a low-maintenance material. No single flooring material seems to have all the desirable attributes. Dirt has “give” but is not durable; concrete is durable but has no “give.” Some of the hardness of concrete and other unyielding materials can be overcome by using rubber mats or deep bedding. Sufficient bedding helps prevent sores or abrasions. Rubber mats and clay can be slippery when wet. For more information on flooring, see “Horse Stable Flooring Materials and Drainage.”
The product details
|Name||Black Powder coated European Horse Stalls Fronts and Horse Stall Panels|
10ft x 7ft ( 3m * 2.2m), 12ft x 7ft(3.6m * 2.2m) and 14ft x 7’ft( 4m*2.2m).
any other sizes you like
|Material||Frame tube 2”x2” (50*50mm), strong U channel to take T&G boards|
|Finish||Powder Coated Finish or Hot Dip Galvanized Finish|
Full welds will make sure the stalls are strong and durable.
No sharp edges promise the people and horse safe.
Yoke door allows horses place his head outside.
Powder Coated Finish: We can PC any color you like. Say, Black Color, Blue Color, Hunter Green color, etc.
Assembly easily: use heavy duty bolts or different way connector to connect together.
Contact Us at Any Time