Payment & Shipping Terms:
|Item Name:||Stainless Steel Flat / Serrated Bearing Bar||Grating Style:||Plain / Smooth, Serrated /teeth, I Bar, Serrated I Bar|
|Technique:||Manual Welding Pressure Welding||Weave Technique:||Plain Weave|
|Material Type:||Stainless Steel Wire||Open Area:||Customized|
Outdoor Metal Grate Flooring Mesh 19w4 Stainless Steel Grating With Fasteners
Stainless Steel Grating is offered with non-standard bearer bar depths and pitches to suit abnormal load conditions. With its longevity, high corrosion resistance, low maintenance, strength and rigidity.
Stainless Steel Bar Grating
1. Bearing bar (width * thickness)
|2. Bearing bar pitch (mm)||12.5, 15, 20, 25, 30, 34.3, 35.3, 40,41.25, 50, 60...(30, 40 mm are recommended )|
|3. Cross bar pitch (mm)||38.1, 50, 76.2, 100, 101.6 .(50, 100 mm are recommended )|
|4. Shape of bearing bar||Plain type, Serrated type(S), I type(I), Serrated I type (IS) (refer to the diagram)|
|5. Surface Treatment||Black/Untreated (U), Hot dip galvanizing (G), Painting (P)|
The production flow of Welded Stainless Steel Bar Grating is illustrated in the following table .
|Pressure Welded Stainless Steel Bar Grating|
|1-Raw material||Cross bar / Bearing bar|
|3-Cutting||Cut to target size|
|5-Surface treatment||Hot Dipped Galvanized|
|6-Packing||Packing according to customer's requirement|
Stainless Steel Grating have many areas of application, both for indoor and outdoor use. The gratings offer good properties for use for e.g. walkways, vehicular gratings, entrance scrapers, fences, burglary protection, gangways for the disabled, false ceilings, etc.
Stainless steel grating can improve its slip resistance by setting the direction of walking over the floor, parallel to the load bars.
This is the introduction of some advanced equipment.
1. Robot Welding
This welding method has high speed, high yield and good quality of welded products.
2. Pressure Welding
The four production lines have higher production every month . Welded grating is manufactured according to the resistance welding method. Under high pressure, and at the same time high amperage, the load bearing bars are connected with the cross bars. The material at the welding points is heated and welded together without additives. This method produces welded joints with no slag. Zinc or paint therefore adheres well to these surfaces..
Our company has advanced equipment to meet the needs of Welded Steel Bar Grating, so the quality of our products is excellent .
Let's introduce our production line.
Beltline:* 2 lines of steel grating production facilities (1500 tons monthly producion capacity)
* 1 line of galvanizing facilities for grating (2,500 tons monthly production capacity)
Contact Person: Helen Wang