Payment & Shipping Terms:
|Material:||Mild Steel||Item Name:||Metal Grate Steps|
|Length:||30 Inch||Finish:||Hot Dipped Galvanized|
|Banding:||Edge Banding||Height:||1 Inch|
Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Treads 1" Deepx 30" Long
Stair Treads are fabricated “steps” used in industrial flooring systems to access elevated levels.
Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Treads can be made from bar grating or plate grating with diamond, slotted, large or small round hole perforations, serrated teeth and textured surfaces to create traction and prevent slipping of persons or equipment. Grated or perforated stair treads also permit dirt, mud, snow, rain and other liquids to pass through the stairs, rather than collecting on the surface and creating a hazard.
1. Stair Treads can be supplied in custom sizes or with different grating specifications.
2. Treads that use 40×4.5 mm grating (length of 1000 mm or greater) use 80 mm wide side plates.
Individual elements of Stair Treads ie.
3. Treads can be manufactured using serrated or plain edge grating.
Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Treads
low carbon steel, aluminum steel and stainless steel.
2. Surface treatment
galvanized, painted, mill finished and other surface treatment.
3. Tread width
8-9/16" and 10-15/16", special sizes can be customized.
4. Tread length
30", 36", 48" and other sizes are available.
5. Tread height
6. Bolt hole center distance
4-1/2" and 7".
Types of Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Treads:
There are two kinds of steel gratings distinguished by different bearing bar types, The respective of features are as follows:
1. Plain: the most widely used gratings, available for flooring sidewalk, all kinds of ditch cover, stair tread, etc.
2. Serrated: best non-skid property & safety compared with plain grating.
This is the introduction of some advanced equipment.
1. Robot Welding
This welding method has high speed, high yield and good quality of welded products.
2. Pressure Welding
The four production lines have higher production every month .The production is very large .
The production flow of Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Tread is illustrated in the following table
|Anti-Corrosion Mild Steel Hot Dipped Galvanized Stair Treads|
|1-Raw material||Cross bar/bearing bar|
|3-Cutting||Cut to target size|
|5-Surface treatment||Hot Dipped Galvanized|
|6-Packing||Pack according to customer's requirement|
Food processing plants, maintenance areas, worker platforms on marine and oil rigs are just a few of the areas that commonly employ the use of stair treads to increase safety.
1. Selling Units
2. Single package size
3. Single gross weight
4. Package Type
1-5 pieces, plastic film + wooden carton; More than 5 pieces, packed into pallets.
Contact Person: Helen Wang
Features: Long life,high quality for anti-skid
bear bar: US standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc
Twisted Cross Bar Pitch: 38.1, 50, 60, 76, 80, 100, 101.6, 120mm, 2'' & 4'' etc
product name: Steel Stair Treads