Payment & Shipping Terms:
|Duty Type:||Light Duty||Material:||Cross Bar / Bearing Bar|
|Surface Treatment:||Hot-dip Galvanized||Bearing Bar Pitch:||30mm,40mm,60mm|
|Cross Bar Pitch:||2-8,recommended 3,4,5||Common Type:||G605 G325 G405 G355 G455|
Light Duty Bar Grating Special Wide Mesh Flowforge Steel Grating Fence
Welded Steel Bar Grating comprises of a series of parallel, flat, load bearing bars at equal spacing. These are held upright by 6mm twisted-square transverse bars that are resistance welded into the top surface.
Welded Steel Bar Grating has become the industry standard for open mesh flooring when creating raised platforms, mezzanine flooring and steel walkways for various applications such as oil & gas, renewable energies, utilities, road & rail, commercial buildings and conveyor systems to name but a few.
The most popular specifications of Welded Steel Bar Grating:
1. Welded Steel Bar Grating with 30mm bearing bar pitch is the most widely used in industrial area. Among the general series, it maintains the strongest resistance to impulsive force.
2. Welded Steel Bar Grating with 40mm bearing bar pitch is one of the most economical & lightest types. It should be the best choice to customer on the occasion when the clear span is small.
3. Welded Steel Bar Grating with 60mm bearing bar pitch & 50mm cross bar pitch is developed specially for mining industry. As it can avoid the mineral splashing down on board, it’s appointed to use in fabrication plant, transfer terminal & other areas of mining.
This is the introduction of some advanced equipment.
1. Robot Welding
This welding method has high speed, high yield and good quality of welded products.
2. Pressure Welding
The four production lines have higher production every month .The production is very large .
Our company has advanced equipment to meet the needs of Welded Steel Bar Grating, so the quality of our products is excellent .
Let's introduce our production line.
Beltline:* 2 lines of steel grating production facilities (1500 tons monthly producion capacity)
* 1 line of galvanizing facilities for grating (2,500 tons monthly production capacity)
|Welded Steel Bar Grating|
|1. Falt Pitch (mm)||15,22,25,30,32.5,34,40,50,60,80,90,etc.,recommended 25,30,34,40.|
|2. Bars Spacing (mm)||From 24-200 arbitrarily chosen, recommended 50,76,100.|
|3. Common Type||G605 G325 G405 G355 G455|
|4. Cross Bar||6 / 8 / 10mm|
|5. Flat Steel Thickness||2-8,recommended 3,4,5|
|6. Surface Treatment||Hot-dip galvanized|
The production flow of Welded Steel Bar Grating is illustrated in the following table .
|Welded Steel Bar Grating|
|1-Raw material||Cross bar / Bearing bar|
|3-Cutting||Cut to target size|
|5-Surface treatment||Hot Dipped Galvanized|
|6-Packing||Packing according to customer's requirement|
Welded Steel Bar Grating is widely used in most general industrial plants as well as commercial buildings, it has wide applications as walkways, platforms, safety barriers, drainage covers and ventilation grates.
It is also ideal for use as mezzanine decking since it supports the same loads as comparable solid flooring. More than that, its cost saving openness maximizes the circulation of air, light, heat, water and sound, while promoting cleanliness.
Contact Person: Helen Wang